Aldan Aluminum Drag Racing Coil Overs
Please specify spring rate
during checkout
Which coil over fits my car ?: Coil overs are a very universal component and not application specific. We offer a variety of lengths to accommodate most any configuration. Simply measure between the two intended mounting points and using the dimensions provided, determine which will fit between those two points.
Determining spring rate: Once you have determined what length coilover you need and single vs. double adjustable, the best, but not only way to determine the correct springs for your car is to weigh the end of the vehicle they are going on and provide this information during checkout, however it may be impractical to determine this when a vehicle is disassembled or under construction. If this is the case we can often evaluate what items are on the vehicle and the vehicle type and come quite close to the correct springs for your car. An example for the front end would be " I have a 69 Camaro, Mustang, or Charger with a Big Block (or small block), blower (or none), aluminum heads (or iron), fiberglass front end (or steel). On the rear in addition to the vehicle type it would help to know if the car is a stock body or has a modified situation such as being backhalfed, or "tubbed".
 |
Application: Front Extended: 13.4" Compressed: 10.2" Travel: 3.2" Adjustment: Rebound Top Mount: Bearings Bottom Mount: Bearings Coil Length: 12" |
 |
Application: Rear Extended: 16.5" Compressed: 12.0" Travel: 4.5" Adjustment: Rebound Top Mount: Bearings Bottom Mount: Bearings Coil Length: 12" |
 |
Application: Rear Extended: 18.0" Compressed: 13.5" Travel: 4.5" Adjustment: Rebound Top Mount: Bearings Bottom Mount: Bearings Coil Length: 12" |
 |
Application: Rear Extended: 15.0" Compressed: 11.8" Travel: 3.2" Adjustment: Rebound Top Mount: Bearings Bottom Mount: Bearings Coil Length: 10" |
 |
Application: Front Extended: 11.6" Compressed:8.9" Travel: 3.2" Adjustment: Rebound Top Mount: Bearings Bottom Mount: Bearings Coil Length: 8" |
 |
Application: Front Extended: 14.0" Compressed:10.4" Travel: 3.4" Adjustment: Double Top Mount: Bearings Bottom Mount: Bearings Coil Length: 10" |
 |
Application: Rear Extended: 15.4" Compressed: 12.0" Travel: 3.4" Adjustment: Doubled Top Mount: Bearings Bottom Mount: Bearings Coil Length: 10" |
 |
Application: Rear Extended: 18.5" Compressed: 13.7" Travel: 4.8" Adjustment: Double Top Mount: Bearings Bottom Mount: Bearings Coil Length: 12"
|
 |
Application: Rear Extended: 15.4" Compressed: 12.0" Travel: 3.4" Adjustment: Compression Top Mount: Bearings Bottom Mount: Bearings Coil Length: 10" |
 |
Application: Rear Extended: 17.0" Compressed: 12.5" Travel: 4.5" Adjustment: Double Top Mount: Bearings Bottom Mount: Bearings Coil Length: 12" |
 |
Application: Front Extended: 14.0" Compressed:10.6" Travel: 3.4" Adjustment: Top Mount: Bearings Bottom Mount: Bearings Coil Length: 10" |
 |
Application: Rear Extended: 17.0" Compressed: 12.5" Travel: 4.5" Adjustment: Top Mount: Bearings Bottom Mount: Bearings Coil Length: 12" |
Telephone
-
408-559-6633
FAX
-
408-559-5283
Postal
Address
-
1436 White Oaks Rd. #7 Campbell CA. 95008
ACCEPTED Send E-mail to gofast@magnumforce.com
Return Policy: We here at Magnum Force will make every effort possible to ensure all of our customers get the correct and highest quality components with the best advice available. In the event an item still needs to be returned please take note of these considerations.
Please call or e-mail us first for a return authorization number. (Perhaps we can find you the correct item instead). Packages will not be delivered without this number present.
No returns on special order or custom fabricated parts. Such as, but not limited to rearend assemblies, etc.
Returns must be in as new condition in original packaging.
No returns after 30 days. Items that have been used, installed, modified, or altered cannot be returned. Items subject up to 30% re-boxing or re-stocking fee and shipping costs cannot be refunded.