Now available with bushings or for solid mounting !
Check out these images of a super clean 426 Hemi Crate motor installation using the Magnumforce bushed motor plate.
Brackets and bushings are included with a color instruction sheet and full color images.
Ride quality is super smooth with the added bonus of increased front end strength by tying together the topside of the frame rails.
Complete pulley and Air Conditioning/Alternator kits are available at this link to make installation a breeze.
Typical Hemi and Big Block motor plate data.
Motor plates serve a multitude of functions and have many benefits. They are often used to eliminate the stress put on the sides of the block where typical motor mounts are located. When a hard launching Mopar Hemi or Big or Small Block leaves the starting line it pulls so hard on this area that it will very frequently cause stress cracks to develop in the block in the area of the original motor mounts. The cylinder walls can also become distorted, causing irregular wear on the skirts of the pistons. When this unit is split in half it is also often referred to as "Elephant Ears". Our pre-configured, profile milled 6061 motor plates make it very simple to install any Big Block, Small Block, or Hemi into an A, B, or E-body with minimal effort. They bolt between the water pump and block and then sit on top of the frame rails, making them that much stronger. Tying them into a pair of forward struts helps triangulate the front end of the car making the rails much stronger and helping to reduce frame twist and distortion. By removing the stock motor mounts, a great deal of clearance is gained for items such as headers and external oiling system components that run directly through that area, especially on Big Blocks and Hemi's.
Click one to order online
 |
 |
 |
 |
 |
| Bushed Motor Plate with power steering Hemi and Big Block Mopar | Bushed Motor Plate with manual steering Hemi and Big Block Mopar | Solid Motor Plate with manual steering Hemi and Big Block Mopar | Solid Motor Plate with power steering Hemi and Big Block Mopar | Small Block Motor Plate Mopar all Configurations |
Example of Mopar 426 Hemi with Magnumforce Bushed Motor Plate, Air Conditioning, Power Steering, and Hi Amp Alternator with associated pulleys and brackets.
Here are some great examples of motor plates in Mopars
| Wrecks to Riches 1969 472 Hemi Dart | Wrecks to Riches 71 472 Hemi GTX | 69 Blown 528 Hemi Daytona |
  |
  |
  |
| Monster Garage 70 426 Hemi Superbee | 72 Blown 440 Charger | 69 440 GTS Dart |
  |
  |
  |
Telephone
-
408-559-6633
FAX
-
408-559-5283
Postal
Address
-
1436 White Oaks Rd. #7 Campbell CA. 95008
ACCEPTED Send E-mail to gofast@magnumforce.com
Return Policy: We here at Magnumforce will make every effort possible to ensure all of our customers get the correct and highest quality components with the best advice available. In the event an item still needs to be returned please take note of these considerations.
Please call or e-mail us first for a return authorization. (Perhaps we can find you the correct item instead !)
No returns on special order or custom fabricated parts. Such as, but not limited to rearend assemblies, etc.
Returns must be in as new condition in original packaging.
No returns after 30 days. Items that have been used, installed, modified, or altered cannot be returned. Items subject up to 30% re-boxing or re-stocking fee and shipping costs cannot be refunded.