| Harley Davidson Nitrous Systems | Fogger Nitrous Systems for Motorcycles and ATV's |
| Fogger Nitrous Systems for Snowmobiles | Fogger Nitrous Systems for Watercraft |
Schematic of typical installation configuration
 |
|
Harley Davidson Nitrous Oxide Injection Systems
click to enlarge image
Dyno Chart
Touch the button and your "Hawg" turns into a wild boar. With a super strong bottom end, Harley engines can take more push button horsepower than most. And, the fully adjustable Fogger lets you choose how much is just right. With the Jets included in each Harley kit, you can expect to see a 30% to 40% increase horsepower and torque. Plus, the Fogger can be adjusted for even more or less power by simply changing Jets if your engine is modified.
Easily installed in an afternoon, the Fogger kit comes complete with everything you need including detailed, easy to follow instructions. All Fogger systems include a 10 ounce or two pound Nitrous bottle (other sizes available), Nitrous and fuel solenoids, Fogger 2 nozzles, filters, fittings, tubing, fuel pump, T fittings, Jets, switch, hose, and all other hardware necessary for a complete installation.
All NOS kits for Harleys come with billet aluminum
brackets to mount the Nitrous bottle and fuel pump. Shown are the 2-pound bottle bracket
(far left), the 10-ounce bottle bracket (center), and the fuel pump bracket (right).
| Application | |
| Kit for Harley Davidson motorcycles, 883cc and up, with 10 oz. bottle (shown above) | |
| Kit for Harley Davidson motorcycles, 883cc and up, with 2 lb. bottle (not shown) |
Tech Note: Some applications may require more fuel for the Nitrous System than a standard petcock will allow. If you require more fuel flow, dual high flow petcocks are available.
Fogger Nitrous Oxide Injection Systems for Motorcycles and ATV's
Adjustable for a 30-40% Increase in power
It doesn't matter whether you are on the track or on the dirt. Touch to go but to fast becomes Fe,. You can add push button horsepower quickly and simply with the NOS Fogger kits for 2 stroke and 4 stroke motorcycles or ATV's. And, the fully adjustable Fogger lets you choose how much is just right. With the Jets included in each kit, you can expect to see a 30% to 40% increase in horsepower and torque. Plus, though Fogger can be adjusted for even more or less power by simply changing Jets if your engine is modified.
Click
here to enlarge Dyno Comparison Chart
Designed for easy installation, each Fogger kit comes complete with everything you need; including detailed, easy to follow instructions. All Fogger systems include a 2 pound Nitrous bottle (other sizes available), electric fuel pump, Nitrous and fuel solenoids, Fogger 2 nozzles, filters, fittings, tubing, distribution blocks or T-fittings, Jets, switches, hose, and all other hardware necessary for a complete installation.
The Fogger system requires a 12 volt DC power supply with a minimum of 12 amps available. For off-road applications you will need to make sure that you have a power supply system that can supply 12 volt DC current with at least 12 amps or 150 watts to the Fogger system.
Complete Fogger Nitrous Systems for 4-stroke Motorcycles and ATV's
| Application | |
| 1 cylinder, up to 250cc. | |
| 1 cylinder, over 250cc | |
| 2 cylinder, 250c to 500cc | |
| 2 cylinder, over 500cc | |
| 3 cylinder, up to 500cc | |
| 3 cylinder, over 500cc to 750cc | |
| 4 cylinder, up to 650cc | |
| 4 cylinder, 4 stroke motorcycles, over 700cc | |
| 6 cylinder, motorcycles | |
| Turbocharged engines | |
| Turbocharged engines, 750cc and over |
Complete Fogger Nitrous Systems for 2-stroke Motorcycles and ATV's
| Application | |
| 1 cylinder, up to 250cc. | |
| 1 cylinder, over 250cc | |
| 2 cylinder, 250c to 500cc | |
| 2 cylinder, over 500cc to 750cc | |
| 3 cylinder, up to 500cc | |
| 3 cylinder, over 500cc |
Tech Note: Some applications may require more fuel for the Nitrous Oxide System than a standard petcock will allow. If you require more fuel flow, dual high flow petcocks are available.
Fogger Nitrous Oxide Injection Systems for Snowmobiles
Kit contents
Bottle heater close-up (included in kit)
Touch the button and exploding fresh powder was never like this. You can add pushbutton. horsepower quickly and simply with the NOS Nitrous Fogger kits for snowmobiles. And, the fully adjustable Fogger lets you choose how much is just right. With the Jets included in each snowmobile kit, you can expect to see a 30% to 40% increase in horsepower and torque. Plus, the Fogger can be adjusted for even more or less power by simply changing Jets if your engine is modified.
Engineered for uncomplicated installation, each Fogger kit comes complete with everything you need; including detailed, easy to follow instructions. All Fogger systems include a 2 pound Nitrous bottle, Nitrous and fuel solenoids, the Fogger 2 nozzles, filters, fittings, tubing, electric fuel pump, T-fittings or distribution blocks, Jets, switches, hose, and all other hardware necessary for a complete installation. Snowmobile kits also include a special Nitrous bottle heater kit to regulate bottle temperature for consistent, maximum power.
The Fogger system requires a 12 volt DC power supply with a minimum of 12 amps available. For off-road applications you will need to make sure that you have a power supply system that can supply 12 volt DC current with at least 12 amps or 150 watts to the Fogger system alone,or 22 amps (270 watts) when using the bottle heater.
Complete Fogger Systems For Snowmobiles
| Application | |
| 2 cylinder snowmobiles, 250cc to 500cc | |
| 2 cylinder snowmobiles, over 500cc | |
| 3 cylinder snowmobiles, over 500cc | |
| 4 cylinder snowmobiles, over 500cc |
Fogger Nitrous Oxide Injection Systems for Watercraft
Adjustable for a 30-40% Increase in power
Click to enlarge image
Touch the button and wave jumping takes a whole new meaning. You can add push button horsepower quickly and simply with NOS Fogger kits for two stroke water craft. And, the fully adjustable Fogger lets you choose how much is just right. With the
Nitrous jets included in each watercraft kit, you can expect to seek a 30% to 40% increase in horsepower and torque. Plus, the Fogger can be adjusted for even more or less power by simply changing Jets if your engine is modified.Engineered for uncomplicated installation, each Fogger kit comes complete with everything you need; including detailed, easy to follow instructions. All Fogger systems include a 2 pound Nitrous bottle, Nitrous and fuel solenoids, the Fogger 2 nozzles, filters, fittings, tubing, electric fuel pump, T-fittings or distribution blocks, Jets, switches, hose, and all other hardware necessary for a complete installation.
The Fogger system requires a 12 volt DC power supply with a minimum of 12 amps available. You will need to make sure that you have a power supply system that can supply 12 volt DC current with at least 12 amps or one hundred and fifty watts to the Fogger system.
Complete Fogger Nitrous Systems for Small Personal Watercraft such as Kawasaki Jet Ski, Surf Jet, and Yamaha Wave Raider
| Application | |
| 2-stroke, 2 cylinder Jet Skis, from 250cc to 500cc. | |
| 2-stroke, 2 cylinder Jet Skis, from 500cc and up. |
Complete Fogger Systems for Larger Personal Watercraft such as Polaris, Sea Doo, Wet Jet, etc.
| Application | |
| 2-stroke, 2 cylinder watercraft, over 500cc. | |
| 2-stroke, 3 cylinder watercraft, over 500cc. | |
Telephone
-
408-559-6633
FAX
-
408-559-5283
Postal
Address
-
1436 White Oaks Rd. #7 Campbell CA. 95008
ACCEPTED Send E-mail to gofast@magnumforce.com
Return Policy: We here at Magnumforce will make every effort possible to ensure all of our customers get the correct and highest quality components with the best advice available. In the event an item still needs to be returned please take note of these considerations.
Please call or e-mail us first for a return authorization. (Perhaps we can find you the correct item instead !)
No returns on special order or custom fabricated parts. Such as, but not limited to rearend assemblies, etc.
Returns must be in as new condition in original packaging.
No returns after 30 days. Items that have been used, installed, modified, or altered cannot be returned. Items subject up to 30% re-boxing or re-stocking fee and shipping costs cannot be refunded.