Magnumforce Race Car Fabrication Home Page Products

Quick Release Buttons, Springs, Tabs, Tools

Click an image to enlarge.

.

This is a typical countersink put in panel on top

Select the button style you prefer and then it's associated spring and plate.  For example: A #6 button needs a #6 Spring to work correctly.  If you're using a plate to attach to you would select a #6 plate as well.

SELF EJECTOR SERIES (Captive Plate) #5 (Small) and #6 (Big) shown
5/8" Diameter head #5 Button (STEEL)

THESE BUTTONS USE #5 (Part# MIL MS5-325) SPRINGS

 3/4" Diameter head #6 Button (STEEL)

THESE BUTTONS USE #6 (Part#MIL MS6-375) SPRINGS

 
OVAL HEAD - (style on top) Buttons Only -No captive Plate.   Oval head buttons do not need to be countersunk in panel. They sit on top of the panels being connected

Quick Release #5 BUTTONS ONLY (STEEL and ALUM)

  Quick Release #6 BUTTONS ONLY (STEEL and ALUM)

THIS BUTTON USES #5  SPRINGS  (Part# MIL MS5-325)

THIS BUTTON USES #6  SPRINGS   (Pert# MIL MS6-375)
 

FLAT HEAD Style (pictured on bottom)

BUTTONS ONLY (STEEL or ALUMINUM)

Flat head buttons DO need to be countersunk in panel (see countersinking tool pictured below)
   
9/16 DIA. HEAD THIS BUTTON USES #6 (Part#MIL MS-325 SPRINGS 11/16 DIA. HEAD THESE BUTTONS USE #6 (Part#MIL MS6-375 SPRINGS

 

wpe29.jpg (18074 bytes)Quick Release SPRINGS

  

wpe3E.jpg (25208 bytes)Quick Release PLATES

The springs rivet to the bottom of the plates using an 1/8" pop rivet.  The plates are typically used to mount things such as hoods to fenders by welding them to the inner edge of the fender or to mount aluminum panels to steel body panels or roll cage tubing.

 

wpe3F.jpg (14442 bytes) RE-ENFORCING PANEL DOUBLER Helps keep the button from pulling through the aluminum panel or fiberglass components like hoods.

  

wpe42.jpg (18920 bytes)BUTTON WRENCHES Won't damage the button as easily as a screwdriver.

 

COUNTER-SINKING PANEL DIMPLER  

Countersinks holes in metal panels for flush mounting.  Simply tighten die set to dimple panels when using #5 or #6 flat head series buttons  
   

 

Home     Products     Cars      News     Search

Contact Information

We can be reached directly by phone Monday thru Friday from 10:00 am to 6:00 pm (Pacific time)

VISA, MasterCard, Discover, American Express, and PayPal welcome.

Ball91E5.gif (3556 bytes)Telephone - 408-559-6633

Ball91E5.gif (3556 bytes)FAX - 408-559-5283 (We do not accept unsolicited advertisements)

Ball91E5.gif (3556 bytes)Postal Address - 1436 White Oaks Rd. #7 Campbell CA. 95008 

              ACCEPTED

Send E-mail to gofast@magnumforce.com

Return Policy:  We here at Magnum Force will make every effort possible to ensure all of our customers get the correct and highest quality components with the best advice available.  In the event an item still needs to be returned please take note of these considerations.

Please call or e-mail us first for a return authorization number.  (Perhaps we can find you the correct item instead). Packages will not be delivered without this number present.

No returns on special order or custom fabricated parts. Such as, but not limited to rearend assemblies, etc.

Returns must be in as new condition in original packaging.

No returns after 30 days.  Items that have been used, installed, modified, or altered cannot be returned.  Items subject up to 30% re-boxing or re-stocking fee and shipping costs cannot be refunded.