Flaming River Universal Joints
The Billet-Joint
Universal joints are CNC machined from aircraft steel to precision tolerances. The sealed needle bearing design will last ten times longer than a standard pin and block universal joint. The unique nickel plating prevents rust without the hassle of painting. Polishing available for a "stainless look" at a nominal charge.Steel Pin and Block U-Joints are the preferred choice of drag racers for the sleek and lightweight designed steering systems.
Steering Couplers are available for direct steering connections where an angle is not required. Couplers can also be used to extend the steering shaft.
Mil-Spec Universal Joints
| Quantity | How do they work? | Typical uses and Special Characteristics | Price | |
|---|---|---|---|---|
| Steel Pin and Block
Universal Joint
|
The prefered choice of drag racers for the sleek and lightweight designed steering systems. Note: Racing design only. NOT for street use. Frequent lubrication is required Column and steering shaft sizes. Example 3/4" smooth column to 9/16" dia. box with 26 splines looks like this = 3/4 x 9/16-26 |
|
||
| 3/4 x 3/4 | $40.00 | |||
| 3/4 x 9/16-26 | $45.00 | |||
| 3/4 x 3/4-36 | $52.56 | |||
| 3/4 x 3/4-30 | $52.56 | |||
| 3/4 x 5/8-36 | $45.00 | |||
| Steering Couplers
|
Couplers are available for direct steering connections where an angle is not required. Couplers can also be used to extend the steering shaft. Overall length is 2" |
|
||
| 3/4 x 9/16-26 | $18.00 | |||
| 3/4 x 3/4-36 | $18.00 | |||
| 3/4-36 x 3/4-36 | $21.00 | |||
| 3/4 x 5/8-36 | $18.00 | |||
| 3/4 x 3/4-30 | $25.00 | |||
| 3/4DD x 3/4DD | $30.00 | |||
| 3/4 x 5/8-36 | $25.00 | |||
| Billet
U-Joints
|
The Billet-Joint universal joints are CNC machined from aircraft steel to precision tolerances. The sealed needle bearing design will last ten times longer than a standard pin and block universal joint. The unique nickle plating prevents rust without the hassle of painting. Polishing available for a "stainless look" at a nominal charge. Column and steering shaft sizes. Example: 3/4" smooth column to 9/16" dia. box with 26 splines looks like this - 3/4 x 9/16-26 |
|
||
3/4" x 3/4" |
$69.00 | |||
9/16"-26 x 3/4" |
$69.00 | |||
9/16"-26 x 3/4"DD |
$69.00 | |||
| 9/16"-26 x 3/4"-36 | $69.00 | |||
| 9/16"-26 x 3/4"-48 | $69.00 | |||
| 9/16"-26 x 5/8"-36 | $69.00 | ||
| 5/8"-36 x 3/4" | $69.00 | |||
| 5/8"-36 x 3/4"DD | $69.00 | |||
| 5/8"-36 x 3/4"-36 | $69.00 | |||
| 5/8"-36 x 5/8 | $69.00 | |||
| 5/8"-36 x 5/8-36 | $69.00 | |||
| 5/8"-36 x 1"DD | $69.00 | ||
| 3/4"-30 x 3/4" | $69.00 | |||
| 3/4"-30 x 3/4"DD | $69.00 | |||
| 3/4"-30 x 3/4"-36 | $69.00 | |||
| 3/4"-36 x 3/4" | $69.00 | |||
| 3/4"-36 x 3/4"DD | $69.00 | |||
| 3/4"-36 x 3/4"-36 | $69.00 | |||
| 3/4"-48 x 3/4" | $69.00 | |||
| 3/4"-48 x 3/4"DD | $69.00 | |||
| 3/4"-48 x 3/4"-36 | $69.00 | |||
| 3/4"-48 x 3/4"-48 | $69.00 | |||
| 3/4"-48 x 1"DD | $69.00 | ||
| 13/16"-36 x 3/4" | $69.00 | |||
| 13/16"-36 x 3/4"DD | $69.00 | |||
| 13/16"-36 x 3/4"-36 | $69.00 | |||
| 13/16"-36 x 13/16-36 | $69.00 | |||
| 13/16"-36 x 1"-48 | $69.00 | |||
| 13/16"-36 x 1" | $69.00 | |||
| 13/16"-36 x 1"DD | $69.00 | ||
| 1"-48 x 3/4" | $69.00 | |||
| 1"-48 x 3/4"DD | $69.00 | |||
| 1"-48 x 3/4"-36 | $69.00 | |||
| 1"-48 x 3/4"-30 | $69.00 | |||
| 1"-48 x 5/8"-36 | $69.00 | |||
| 1"-48 x 1" | $69.00 | |||
| 1"-48 x "DD | $69.00 | |||
| 3/4"DD x 3/4" | $69.00 | |||
| 3/4"DD x 3/4"DD | $69.00 | |||
| 3/4"DD x 7/8DIA. | $69.00 | |||
| 1"DD x 3/4" | $69.00 | |||
| 1"DD x 3/4"-30 | $69.00 | |||
| 1"DD x 3/4"-36 | $69.00 | |||
| 1"DD x 3/4"-DD | $69.00 | |||
| 1"DD x 1" | $69.00 | |||
| 1"DD x 9/16-26 | $69.00 | |||
| 3/4" x 17mm DD | $69.00 | |||
| 3/4"DD x 17mm DD | $69.00 | |||
| 3/4"-48 x 17mm DD | $69.00 | |||
| 3/4"-36 x 17mm DD | $69.00 | |||
| 1" x 1" | $69.00 | |||
| 1" x 3/4" | $69.00 | |||
| 1" x 3/4"DD | $69.00 | |||
| 1" x 3/4"-30 | $69.00 | |||
| 1" x 3/4"-36 | $69.00 | |||
| 5/8"-36 x 3/4"DD | $69.00 | |||
| 5/8"-36 x 3/4"-36 | $69.00 | |||
| 5/8"-36 x 3/4" | $69.00 | |||
| 9/16"-36 x 9/16"-36 | $69.00 | |||
| 9/16"-36 x 3/4"DD | $69.00 | |||
| Check box's then any button when done on this page | ||||
| Mil-Spec Universal
Joints
|
These universal joints are manufactured to military specs for aircraft and have become the select choice for drag racers due to the lightweight design. Lubricant filled silicone boot provides maintenance free operation for extended u-joint life. Designed for high temp environments with a continuous rating of 650 deg. farenheit.
|
|
||
| Check box's then any button when done on this page | 1/2" (Dimension G) 2-5/16" (Dimension B) |
$74.80 | ||
| 5/8" (Dimension G) 2-3/4" (Dimension B) |
$74.80 | |||
| 3/4" (Dimension G) 3-3/16" (Dimension B) |
$74.80 | ||
| 7/8" (Dimension G) 3-5/8" (Dimension B) |
$79.80 | |||
Telephone
-
408-559-6633
FAX
-
408-559-5283
Postal
Address
-
1436 White Oaks Rd. #7 Campbell CA. 95008
ACCEPTED Send E-mail to gofast@magnumforce.com
Return Policy: We here at Magnumforce will make every effort possible to ensure all of our customers get the correct and highest quality components with the best advice available. In the event an item still needs to be returned please take note of these considerations.
Please call or e-mail us first for a return authorization. (Perhaps we can find you the correct item instead !)
No returns on special order or custom fabricated parts. Such as, but not limited to rearend assemblies, etc.
Returns must be in as new condition in original packaging.
No returns after 30 days. Items that have been used, installed, modified, or altered cannot be returned. Items subject up to 30% re-boxing or re-stocking fee and shipping costs cannot be refunded.
